Standards of the Chemical and Petroleum Products Sector – Adopted
| S.no. | Standard Number | Standard name |
| 1 | SASO ASTM D5845:2022 | Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol, and tert-Butanol in Gasoline by Infrared Spectroscopy |
| 2 | SASO ASTM D6988:2022 | Standard Guide for Determination of Thickness of Plastic Film Test Specimens |
| 3 | SASO ASTM D3339:2022 | Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration |
| 4 | SASO ASTM D6160:2022 | Standard Test Method for Determination of Polychlorinated Biphenyls (PCBs) in Waste Materials by Gas Chromatography |
| 5 | SASO ASTM C1522:2022 | Standard Test Method for Extensibility After Heat Aging of Cold Liquid-Applied Elastomeric Waterproofing Membranes |
| 6 | SASO ASTM D2699:2022 | Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel |
| 7 | SASO ASTM D2268:2022 | Standard Test Method for Analysis of High-Purity n-Heptane and Isooctane by Capillary Gas Chromatography |
| 8 | SASO ASTM D6163M:2022 | Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Glass Fibre Reinforcements |
| 9 | SASO ASTM D2729:2022 | Standard Specification for Poly (Vinyl Chloride) (PVC) Sewer Pipe and Fittings |
| 10 | SASO ASTM D7348:2022 | Standard Test Methods for Loss on Ignition (LOI) of Solid Combustion Residues |
| 11 | SASO ASTM D6823:2022 | Standard Specification for Commercial Boiler Fuels with Used Lubricating Oils |
| 12 | SASO ISO 6943:2022 | Rubber, Vulcanized – Determination of Tension Fatigue |
| 13 | SASO ASTM D7043:2022 | Standard Test Method for Indicating Wear Characteristics of Non-Petroleum and Petroleum Hydraulic Fluids in a Constant Volume Vane Pump |
| 14 | SASO ASTM D2661:2022 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings |
| 15 | SASO ASTM D3273:2022 | Standard Test Method for Resistance to Growth of Mould on the Surface of Interior Coatings in an Environmental Chamber |
| 16 | SASO ASTM D6400:2022 | Standard Specification for Labelling of Plastics Designed to be Aerobically Composted in Municipal or Industrial Facilities |
| 17 | SASO ASTM D6162M:2022 | Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fibre Reinforcements |
| 18 | SASO ISO 817:Amd 2:2022 | Refrigerants – Designation and Safety Classification – Amendment 2 |
| 19 | SASO ASTM D1766:2022 | Standard Test Method for Rubber Chemicals – Solubility |
| 20 | SASO ASTM D6221M:2022 | Standard Specification for Reinforced Bituminous Flashing Sheets for Roofing and Waterproofing |
| 21 | SASO ASTM D6152M:2022 | Standard Specification for SEBS-Modified Mopping Asphalt Used in Roofing |
| 22 | SASO ASTM D2013M:2022 | Standard Practice for Preparing Coal Samples for Analysis |
| 23 | SASO ASTM D6164M:2022 | Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinforcements |
| 24 | SASO ASTM D7223:2022 | Standard Specification for Aviation Certification Turbine Fuel |
| 25 | SASO ASTM D3311:2022 | Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns |
| 26 | SASO ASTM D6223M:2022 | Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fibre Reinforcements |
Standards of the Electrical and Electronic Products Sector – Adopted
| S.no. | Standard Number | Standard name |
| 1 | SASO IEC 60193:2022 | Hydraulic Turbines, Storage Pumps, and Pump-Turbines – Model Acceptance Test |
| 2 | SASO IEC 61400-27-1:2022 | Wind Energy Generation Systems – Part 27-1: Electrical Simulation Models – Generic Models |
| 3 | SASO IEC 60034-23:2022 | Rotating Electrical Machines – Part 23: Repair, Overhaul, and Reclamation |
| 4 | SASO IEC 61400-2:2022 | Wind Turbines – Part 2: Design Requirements for Small Wind Turbines |
| 5 | SASO IEC 60519-6:2022 | Safety in Installations for Electro heating and Electromagnetic Processing – Part 6: Particular Requirements for High Frequency Dielectric and Microwave Heating and Processing Equipment |
Standards of the Service Sector – Adopted
| S.no. | Standard Number | Standard name |
| 1 | SASO ISO 15511:2022 | Information and Documentation – International Standard Identifier for Libraries and Related Organizations (ISIL) |
| 2 | SASO ISO 690:2022 | Information and Documentation – Guidelines for Bibliographic References and Citations to Information Resources |
| 3 | SASO ISO IEC 21118:2022 | Information Technology – Office Equipment – Information to be Included in Specification Sheets for Data Projectors |
| 4 | SASO IEC 31010:2022 | Risk Management – Risk Assessment Techniques |
| 5 | SASO ISO 23081-2:2022 | Information and Documentation – Metadata for Managing Records – Part 2: Conceptual and Implementation Issues |
VERGER is accredited by SASO to issue a Product Certificate of Conformity for a large scope of products exported to the Kingdom of Saudi Arabia.
To confirm if your product(s) requires certification or to request a quotation, please contact us.